• 　●The generator can be moved to facilitate
•       debugging and replacement.
• 　●Remote control.
• 　●Centralized load design is adopted for
•       terminal load.

• 　●Professional standard test training and
•       value-added services of system
•       reinforcement design.
• 　●Fully automated standard testing of the
•       whole process.
• 　●The test system can be customized.
• 　●Margin of safety test can be performed.

• 　●Combined with EMC facilities, the
•       background noise is low, which is far
•       better than the margin index required
•       by the standard.
• 　●Compatible with the global major power
•       supply types.

• 　●Tests covering transmitters, amplifiers
•       and receivers.
• 　●Customization service for special filter of
•       EUT.

• 　●The high sensitivity precise voltage sensor
•       technology is used to solve the problem
•       of AC base wave.
• 　●Wide dynamic range and wide voltage
•       range technology (measuring voltage is
•       from 1mV, to 1000V).
• 　●Compatible with RTCA DO-16. Chapter
•       18.

• 　●Efficient compliance verification test
•       program.
• 　●Precise evaluative test program.

• 　●Wide test frequency range: 2kHz～400
•       MHz, covering the standard test
•       requirements. (especially for low
•       frequency test of EUT of solid state
•       power supply on
•       ship or submarine)
• 　●High security: automatic system fault
•       monitoring, automatic fault protection.

• 　●Wide test frequency range: 10kHz ~
•       40GHz, filed strength 200V/m.
• 　●High accuracy: Multi-probe application,
•       automated testing.
• 　●High security: automatic system fault
•       monitoring, automatic fault protection.

• 　●Low background noise, much better than
•       the minimum level required by MIL-STD
•       -461G standard.
• 　●Frequency range: 9kHz~40GHz
•       (optional: 50GHz), shielded efficiency
•       is better than the requirements of 
•       EN 50147-1.

• 　●Low background noise, much better than
•       the minimum level required by MIL-
•       STD-461G standard.
• 　●Frequency range: 9kHz~18GHz (optional:
•       40GHz), shielded efficiency is better
•       than the requirements of  EN 50147-1.

• 　●Frequency range: 200MHz~18GHz
•       （optional:  40GHz）.
• 　●The reverberation chamber size and
•       internal configuration can be
•       customized.

• 　●Mobile shielding test vehicle.
• 　●Frequency range: 9kHz~18GHz
•       (optional: 40GHz)
• 　●The size and internal configuration of the
•       mobile electromagnetic shielded
•       vehiclecan be customized.

• 　●The size and configuration of the OATS
•       can be customized (such as turntable,
•       reflective floor, etc.).

• 　●Professional standard test training and 
•       value-added service of system
•       reinforcement design.
• 　●Fully automated standard testing of the
•       whole process.
• 　●The test system can be customized.
• 　●Safety margin test can be performed.

• 　●Test frequency range: 10kHz ~ 45GHz
• 　●Professional standard test training and 
•       value-added service of system
•       reinforcement design.
• 　●Safety margin test can be performed.

• 　●Fully automated standard testing of the
•       whole process.
• 　●Professional standard test training and 
•       value-added service of system
•       reinforcement design.
• 　●Safety margin test can be performed.

• 　●Discharge voltage: ±0.2kV~±30kV
• 　●Professional standard test training and 
•       value-added service of system
•       reinforcement design.
• 　●Safety margin test can be performed.

• 　●Discharge voltage: ±50kV~±300kV
• 　●Maximum discharge current: 10mA
• 　●Professional standard test training and 
•       value-added service of system
•       reinforcement design.
• 　●Safety margin test can be performed.

• 　●Discharge voltage: ±50kV~±300kV
• 　●Professional standard test training and 
•       value-added service of system
•       reinforcement design.
• 　●Safety margin test can be performed.

• 　●Test frequency range: 500kHz~40GHz
• 　●Low noise floor test system.
• 　●Fully automated standard testing of the
•       whole process.
• 　●The mobile EMCON test system can be
•       customized (used for site test, and the
•       electromagnetic background of the site
•       will be evaluated before the test).
• 　●Professional standard test training.

Other electromagnetic compatibility testing system and equipment

　Magnetic field test,
　Electric field test,
　Antenna port
　interference voltage
　test, etc.

• 　●Fully automated standard testing of the
•       whole process.
• 　●Professional standard test training .
• 　●The test system can be customized.

• 　●The generator can be moved to facilitate
•       debugging and replacement.
• 　●Remote control.
• 　●Centralized load design is adopted for
•       terminal load.

• 　●Professional standard test training and
•       value-added services of system
•       reinforcement design.
• 　●Fully automated standard testing of the
•       whole process.
• 　●The test system can be customized.
• 　●Margin of safety test can be performed.

• 　●Combined with EMC facilities, the
•       background noise is low, which is far
•       better than the margin index required
•       by the standard.
• 　●Compatible with the global major power
•       supply types.

• 　●Tests covering transmitters, amplifiers
•       and receivers.
• 　●Customization service for special filter of
•       EUT.

• 　●The high sensitivity precise voltage sensor
•       technology is used to solve the problem
•       of AC base wave.
• 　●Wide dynamic range and wide voltage
•       range technology (measuring voltage is
•       from 1mV, to 1000V).
• 　●Compatible with RTCA DO-16. Chapter
•       18.

• 　●Efficient compliance verification test
•       program.
• 　●Precise evaluative test program.

• 　●Wide test frequency range: 2kHz～400
•       MHz, covering the standard test
•       requirements. (especially for low
•       frequency test of EUT of solid state
•       power supply on
•       ship or submarine)
• 　●High security: automatic system fault
•       monitoring, automatic fault protection.

• 　●Wide test frequency range: 10kHz ~
•       40GHz, filed strength 200V/m.
• 　●High accuracy: Multi-probe application,
•       automated testing.
• 　●High security: automatic system fault
•       monitoring, automatic fault protection.

• 　●Low background noise, much better than
•       the minimum level required by MIL-STD
•       -461G standard.
• 　●Frequency range: 9kHz~40GHz
•       (optional: 50GHz), shielded efficiency
•       is better than the requirements of 
•       EN 50147-1.

• 　●Low background noise, much better than
•       the minimum level required by MIL-
•       STD-461G standard.
• 　●Frequency range: 9kHz~18GHz (optional:
•       40GHz), shielded efficiency is better
•       than the requirements of  EN 50147-1.

• 　●Frequency range: 200MHz~18GHz
•       （optional:  40GHz）.
• 　●The reverberation chamber size and
•       internal configuration can be
•       customized.

• 　●Mobile shielding test vehicle.
• 　●Frequency range: 9kHz~18GHz
•       (optional: 40GHz)
• 　●The size and internal configuration of the
•       mobile electromagnetic shielded
•       vehiclecan be customized.

• 　●The size and configuration of the OATS
•       can be customized (such as turntable,
•       reflective floor, etc.).

• 　●Professional standard test training and 
•       value-added service of system
•       reinforcement design.
• 　●Fully automated standard testing of the
•       whole process.
• 　●The test system can be customized.
• 　●Safety margin test can be performed.

• 　●Test frequency range: 10kHz ~ 45GHz
• 　●Professional standard test training and 
•       value-added service of system
•       reinforcement design.
• 　●Safety margin test can be performed.

• 　●Fully automated standard testing of the
•       whole process.
• 　●Professional standard test training and 
•       value-added service of system
•       reinforcement design.
• 　●Safety margin test can be performed.

• 　●Discharge voltage: ±0.2kV~±30kV
• 　●Professional standard test training and 
•       value-added service of system
•       reinforcement design.
• 　●Safety margin test can be performed.

• 　●Discharge voltage: ±50kV~±300kV
• 　●Maximum discharge current: 10mA
• 　●Professional standard test training and 
•       value-added service of system
•       reinforcement design.
• 　●Safety margin test can be performed.

• 　●Discharge voltage: ±50kV~±300kV
• 　●Professional standard test training and 
•       value-added service of system
•       reinforcement design.
• 　●Safety margin test can be performed.

• 　●Test frequency range: 500kHz~40GHz
• 　●Low noise floor test system.
• 　●Fully automated standard testing of the
•       whole process.
• 　●The mobile EMCON test system can be
•       customized (used for site test, and the
•       electromagnetic background of the site
•       will be evaluated before the test).
• 　●Professional standard test training.

Other electromagnetic compatibility testing system and equipment

　Magnetic field test,
　Electric field test,
　Antenna port
　interference voltage
　test, etc.

• 　●Fully automated standard testing of the
•       whole process.
• 　●Professional standard test training .
• 　●The test system can be customized.